Best Exhaust for Jeep Wrangler (2018-2024): Top Picks & Buyer’s Guide
DTP Parts is reader-supported. When you buy through links on our site, we may earn an affiliate commission at no extra cost to you.
Affiliate Disclosure: dtpparts.com is a participant in affiliate advertising programs. We may earn a commission when you purchase through our links, at no extra cost to you. All recommendations are based on independent research and real-world performance data.
Best Exhaust for Jeep Wrangler (2018–2024): Get the Growl Your Rig Deserves
If you’re hunting for the best exhaust for Jeep Wrangler models from 2018 to 2024, you’ve come to the right place. Whether you’re rocking a JL with the 2.0L turbo four-cylinder, the legendary 3.6L Pentastar V6, or the burly 6.4L 392 HEMI, swapping out the factory exhaust is one of the fastest ways to wake up your Wrangler’s personality. A quality aftermarket exhaust delivers a more aggressive tone, can unlock a few extra horsepower, and — let’s be honest — makes every trail run and highway cruise a whole lot more satisfying. In this guide, we break down the top exhaust systems for your JL or JLU, what to look for before you buy, and how to get it installed without losing your mind.
Quick Comparison Table: Top Exhausts for 2018–2024 Jeep Wrangler
| Brand / System | Type | Material | Sound Level | Best For |
|---|---|---|---|---|
| Borla ATAK Cat-Back | Cat-Back | T-304 Stainless | Aggressive | Max sound & style |
| Borla S-Type Cat-Back | Cat-Back | T-304 Stainless | Moderate-Aggressive | Daily driver upgrade |
| MagnaFlow Street Series | Cat-Back | Stainless Steel | Moderate | Deep tone, daily use |
| Flowmaster Outlaw | Cat-Back | 409 Stainless | Very Aggressive | Off-road enthusiasts |
| Rugged Ridge Cat-Back | Cat-Back | Stainless Steel | Mild-Moderate | Budget-friendly upgrade |
Our Top Exhaust Picks for the 2018–2024 Jeep Wrangler JL / JLU
1. Borla ATAK Cat-Back Exhaust — Best for Maximum Sound
If you want every person in the parking lot to know your Wrangler just pulled in, the Borla ATAK is your weapon of choice. ATAK stands for Aggressive Touring Acoustics Kit, and Borla delivers exactly that. Built from aircraft-quality T-304 stainless steel, this system is engineered for both the 3.6L Pentastar V6 and the 2.0L turbocharged four-cylinder. Expect a deep, rumbling tone at idle that builds to a thunderous roar under hard acceleration — without the annoying drone on the highway that plagues some competitors.
Check the Borla ATAK Cat-Back for your Wrangler
[CTA_BUTTON:borla-atak-wrangler-jl:Borla ATAK Cat-Back]
Pros:
- Extremely aggressive, head-turning exhaust note
- Premium T-304 stainless steel construction with million-mile warranty
- Bolt-on fitment — no cutting or welding required
- Dyno-tested for measurable power gains
Cons:
- Premium price point — this is a top-shelf investment
- May be too loud for some daily drivers or HOA-heavy neighborhoods
2. Borla S-Type Cat-Back Exhaust — Best All-Around Daily Driver
The Borla S-Type is the sweet spot in Borla’s lineup — more aggressive than stock, but dialed back just enough to keep your sanity on long road trips. It shares the same T-304 stainless construction and no-weld installation as the ATAK but delivers a tone that’s confident and sporty rather than outright rowdy. This is the go-to pick for Wrangler owners who want a meaningful upgrade without going overboard.
Shop the Borla S-Type for 2018–2024 Wrangler
[CTA_BUTTON:borla-stype-wrangler-jl:Borla S-Type Cat-Back]
Pros:
- Perfect balance of sound and livability
- Same legendary Borla build quality as the ATAK
- Great fit for both JL 2-door and JLU 4-door models
Cons:
- Still a premium investment
- Those wanting maximum aggression should step up to the ATAK
3. MagnaFlow Street Series Cat-Back — Best Deep Tone
MagnaFlow has built a reputation for producing clean, deep exhaust notes that sound factory-quality but dramatically better. The Street Series for the 2018–2024 Wrangler is no exception. Straight-through perforated core muffler technology delivers a smooth, rich sound that never gets raspy. If you love the idea of a Wrangler that sounds authoritative without screaming for attention, MagnaFlow hits the mark.
View MagnaFlow Street Series for Jeep Wrangler
[CTA_BUTTON:magnaflow-street-wrangler-jl:MagnaFlow Street Series]
Pros:
- Refined, deep exhaust tone — never raspy or droning
- All stainless construction with excellent longevity
- Wide availability and strong customer support
- Competitive pricing compared to Borla
Cons:
- Sound may be too subtle for drivers wanting maximum aggression
4. Flowmaster Outlaw Cat-Back — Best for Off-Road Warriors
The Flowmaster Outlaw is not for the faint of heart. This system is purpose-built for Wrangler owners who spend weekends on trails rather than in suburban driveways. The Outlaw produces one of the loudest, most aggressive exhaust notes in its class — a signature Flowmaster rumble with serious attitude. It’s built from 409 stainless steel, making it durable enough to handle the rigors of off-road abuse, mud splatter, and creek crossings.
Get the Flowmaster Outlaw for Your Wrangler
[CTA_BUTTON:flowmaster-outlaw-wrangler-jl:Flowmaster Outlaw]
Pros:
- Iconic, loud Flowmaster exhaust character
- 409 stainless steel built for tough conditions
- More affordable than premium T-304 systems
- Great for lifted builds and trail rigs
Cons:
- 409 stainless is less corrosion-resistant than T-304
- Very loud — highway drone can be noticeable
5. Rugged Ridge Cat-Back Exhaust — Best Budget Pick
Not everyone wants to spend $800–$1,200 on an exhaust, and that’s perfectly reasonable. Rugged Ridge offers a solid stainless steel cat-back system at a fraction of the cost of the premium brands. You get a noticeable improvement over the stock exhaust — both in sound and looks — without emptying your wallet. Fitment is specific to JL and JLU models, and the bolt-on installation keeps things accessible for home mechanics.
Shop Rugged Ridge Cat-Back for Jeep Wrangler
[CTA_BUTTON:rugged-ridge-exhaust-wrangler-jl:Rugged Ridge Cat-Back]
Pros:
- Significantly more affordable than premium brands
- Solid stainless construction for the price
- Direct bolt-on fit for JL/JLU models
- Good sound improvement over stock
Cons:
- Sound and build quality don’t quite match Borla or MagnaFlow
- Thinner material may not last as long in harsh climates
Exhaust Buying Guide: What to Know Before You Shop
Cat-Back vs. Axle-Back: What’s the Difference?
A cat-back exhaust replaces everything from the catalytic converter back — including the mid-pipe, muffler, and tips. This gives you the biggest improvement in both sound and performance. An axle-back only replaces the muffler and tips, offering a simpler install at lower cost but less overall impact. For the 2018–2024 Wrangler, most enthusiasts opt for the cat-back for a more complete upgrade.
Engine Fitment Matters
The 2018–2024 Wrangler JL comes in three engine options:
- 3.6L Pentastar V6 — Most common; widest exhaust selection
- 2.0L Turbo Four-Cylinder — Requires turbocharged-specific systems
- 6.4L HEMI V8 (392) — Limited but growing aftermarket support
Always verify engine compatibility before purchasing. A V6 exhaust will not fit a turbo four-cylinder application.
Stainless Steel Grade: T-304 vs. 409
T-304 stainless steel is the gold standard — highly corrosion-resistant, shiny, and extremely durable. You’ll find it on premium brands like Borla. 409 stainless is more affordable but slightly less corrosion-resistant, making it a solid choice for off-road builds where rock rash is more of a concern than rust.
Sound Level: Setting Realistic Expectations
Exhaust sound is highly subjective. What sounds aggressive on a YouTube clip might feel unbearable after 500 miles on the highway. Consider how you use your Wrangler: daily commuter, weekend warrior, or dedicated trail rig. Match your exhaust choice to your lifestyle, not just the coolest sound clip you found online.
Brief Install Overview
Most cat-back exhaust systems for the 2018–2024 Wrangler are designed for a bolt-on installation that an experienced DIYer can complete in 1–3 hours with basic hand tools. Here’s a quick overview of the process:
- Lift and secure the vehicle on jack stands or drive it onto ramps.
- Let the factory exhaust cool completely before touching anything.
- Spray all factory bolts and hangers with penetrating oil (PB Blaster works great) and let it soak for 15–30 minutes.
- Remove the factory mid-pipe, muffler, and tips by unbolting the flange connection at the catalytic converter and sliding off the rubber hangers.
- Install the new system by reversing the process — start at the front flange and work your way back.
- Leave all connections loose until the system is fully assembled, then tighten everything to ensure proper alignment.
- Start the engine and check for leaks before taking it for a drive.
Pro tip: A second set of hands makes managing the weight of the exhaust sections significantly easier, especially on JLU 4-door models.
Frequently Asked Questions
Will an aftermarket exhaust void my Jeep Wrangler warranty?
Under the Magnuson-Moss Warranty Act, a dealer cannot void your warranty simply because you installed an aftermarket exhaust. However, if a dealer can prove the exhaust caused a specific failure, that particular repair may not be covered. For most bolt-on cat-back systems, warranty impact is minimal. Always document your installation and keep your factory parts.
How much horsepower will an exhaust add to my Jeep Wrangler?
A cat-back exhaust on a naturally aspirated 3.6L Pentastar V6 typically yields modest gains of 5–15 horsepower. On the 2.0L turbocharged engine, gains can be slightly higher since reducing back pressure benefits forced-induction motors more. For significant power gains, pair your exhaust with a cold air intake and a tune.
Does the Jeep Wrangler JL exhaust fit the JLU (4-door)?
Not always — the JL 2-door and JLU 4-door have different wheelbase dimensions that affect mid-pipe length. Most reputable brands like Borla and MagnaFlow sell separate part numbers for each configuration. Always confirm whether a system is listed for the JL or JLU before ordering.
Is the 2.0L turbo exhaust different from the 3.6L V6 exhaust?
Yes. The 2.0L turbocharged four-cylinder has a different exhaust routing and connection point compared to the 3.6L V6. These are not interchangeable. When shopping, filter specifically by engine size (2.0L or 3.6L) to ensure you’re purchasing the correct fitment.
What exhaust sounds best on a Jeep Wrangler?
“Best” is subjective, but the Borla ATAK is widely regarded as the most aggressive-sounding option, while MagnaFlow Street Series is praised for a deep, refined tone. Flowmaster Outlaw sits at the extreme end for off-road enthusiasts. We recommend listening to YouTube sound clips for each system on your specific engine before deciding.
Final Verdict: Which Exhaust Should You Buy for Your 2018–2024 Jeep Wrangler?
Choosing the best exhaust for your Jeep Wrangler really comes down to how you use your rig and how loud you want to go. Here’s our quick-reference summary:
- Best Overall Sound + Quality: Borla ATAK Cat-Back — the gold standard for aggressive Wrangler tone.
- Best Daily Driver Balance: Borla S-Type Cat-Back — aggressive enough to turn heads, livable enough for road trips.
- Best Deep Clean Tone: MagnaFlow Street Series — refined, authoritative, and never raspy.
- Best for Trail Rigs: Flowmaster Outlaw — raw, loud, and built for the dirt.
- Best Budget Pick: Rugged Ridge Cat-Back — solid improvement without breaking the bank.
Whatever you choose, upgrading your Wrangler’s exhaust is one of the most satisfying modifications you can make — every key turn will remind you why you did it. Just make sure to verify fitment for your specific engine (2.0L, 3.6L, or 6.4L) and body style (JL or JLU) before hitting that order button.
Have questions about fitment or need help deciding between two systems? Drop a comment below or reach out to our team at dtpparts.com — we’re here to help you get the right part the first time.