Best Exhaust for Toyota Tacoma (2020-2024): Top Picks & Buyer’s Guide
DTP Parts is reader-supported. When you buy through links on our site, we may earn an affiliate commission at no extra cost to you.
Affiliate Disclosure: dtpparts.com is a participant in affiliate advertising programs designed to provide a means for sites to earn advertising fees by linking to retailer websites. We may earn a commission when you purchase through our links, at no extra cost to you.
Best Exhaust for Toyota Tacoma (2020-2024): Everything You Need to Know
If you’re searching for the best exhaust for Toyota Tacoma, you’ve come to the right place. Whether you want a deeper, more aggressive growl on your daily commute or you’re chasing extra horsepower on the trail, upgrading your 2020-2024 Tacoma’s exhaust system is one of the most rewarding bolt-on modifications you can make. The third-gen Tacoma — powered by either the 2.7L four-cylinder or the 3.5L V6 — has a solid factory exhaust, but it leaves real performance and sound on the table. In this guide, we break down the top exhaust systems available, explain exactly what to look for, and help you pick the perfect fit for your truck and budget.
Quick Comparison Table: Top Exhaust Systems for 2020-2024 Toyota Tacoma
| Exhaust System | Type | Material | Sound Level | Best For |
|---|---|---|---|---|
| Borla S-Type Cat-Back | Cat-Back | T-304 Stainless | Moderate-Aggressive | Daily Driver + Weekend Warrior |
| Flowmaster Outlaw | Cat-Back | 409S Stainless | Loud & Deep | Enthusiast Build |
| MagnaFlow Street Series | Cat-Back | T-304 Stainless | Mild-Moderate | Clean Sound, Budget-Friendly |
| Banks Power Monster | Cat-Back | 304 Stainless | Moderate | Performance + Towing |
| Gibson Performance | Axle-Back | Aluminized Steel | Mild | Budget Pick |
Top Exhaust Picks for the 2020-2024 Toyota Tacoma
1. Borla S-Type Cat-Back Exhaust — Best Overall
Borla has been making premium exhaust systems in the USA for decades, and their S-Type cat-back for the 2020-2024 Tacoma V6 is widely considered the gold standard. Built from T-304 austenitic stainless steel, this system is engineered to last the lifetime of your truck with a Million Mile Warranty to back it up. The S-Type delivers a throaty, sporty tone at idle and cruise without becoming obnoxious at highway speeds — perfect for the Tacoma owner who uses their truck every day but still wants to turn heads.
Pros:
- Premium T-304 stainless construction — rust-proof for life
- Refined, aggressive sound without excessive drone
- Noticeable throttle response improvement on the 3.5L V6
- Backed by Borla’s legendary Million Mile Warranty
- Direct bolt-on fitment for 2020-2024 Tacoma
Cons:
- Premium price point
- Sound may be too subtle for those wanting maximum aggression
Check the Borla S-Type Cat-Back on Amazon [AFFILIATE_LINK:borla-stype-tacoma-catback]
[CTA_BUTTON:borla-stype-tacoma-catback:Amazon]
2. Flowmaster Outlaw Cat-Back — Best for Maximum Sound
If you want your Tacoma to announce its presence before it even rounds the corner, the Flowmaster Outlaw is your system. This is Flowmaster’s most aggressive offering, delivering a deep, loud, distinctly American muscle tone that’s unlike anything the stock Tacoma exhaust can produce. Built from 409S stainless steel, it’s durable and fits 2020-2024 Tacoma V6 models with a direct bolt-on installation. Fair warning: this one is genuinely loud. It’s an enthusiast’s exhaust, not a commuter’s.
Pros:
- Loudest, most aggressive sound in the segment
- Iconic Flowmaster deep rumble tone
- Direct OEM-style bolt-on fitment
- Solid 409S stainless construction
Cons:
- Significant interior drone at certain RPMs — not ideal for long highway hauls
- 409S stainless is good but not quite as premium as T-304
- May draw attention in noise-restricted areas
Check the Flowmaster Outlaw on Amazon [AFFILIATE_LINK:flowmaster-outlaw-tacoma]
[CTA_BUTTON:flowmaster-outlaw-tacoma:Amazon]
3. MagnaFlow Street Series Cat-Back — Best Value
MagnaFlow is one of the most trusted names in the exhaust world, and their Street Series cat-back for the 2020-2024 Tacoma hits the sweet spot between cost and quality. Constructed from T-304 stainless steel with a straight-through perforated core muffler design, the Street Series produces a clean, smooth exhaust note — noticeably better than stock without being obnoxious. If you’re upgrading your exhaust for the first time, MagnaFlow is an excellent starting point.
Pros:
- T-304 stainless steel at a competitive price
- Smooth, refined sound — great for daily drivers
- Minimal interior drone on highway
- Strong brand reputation and customer support
Cons:
- Sound is more subtle — enthusiasts may want more aggression
- Moderate performance gains compared to premium options
Check the MagnaFlow Street Series on Amazon [AFFILIATE_LINK:magnaflow-street-tacoma]
[CTA_BUTTON:magnaflow-street-tacoma:Amazon]
4. Banks Power Monster Exhaust — Best for Towing & Performance
If you regularly tow or haul heavy loads with your Tacoma, the Banks Power Monster deserves serious consideration. Banks Engineering designed this system with performance and efficiency in mind — reducing backpressure to liberate horsepower and torque where you need it most: in the lower RPM range that matters for towing. It’s built from 304 stainless steel with mandrel-bent tubing and produces a conservative but authoritative tone. Banks claims measurable horsepower and torque gains on the Tacoma’s 3.5L V6, making this the most functionally oriented pick on our list.
Pros:
- Engineered specifically for performance and towing applications
- Measured low-end torque improvements
- High-quality 304 stainless with mandrel-bent tubing
- Conservative sound — won’t upset your neighbors
Cons:
- One of the pricier options on this list
- Sound is too subtle for enthusiasts who want an aggressive note
Check the Banks Power Monster on Amazon [AFFILIATE_LINK:banks-monster-tacoma]
[CTA_BUTTON:banks-monster-tacoma:Amazon]
5. Gibson Performance Axle-Back — Best Budget Pick
Not ready to commit to a full cat-back system? The Gibson Performance axle-back is a wallet-friendly entry point that still gives your Tacoma a noticeably improved exhaust note. An axle-back system replaces only the section of exhaust behind the rear axle — including the muffler and tip — making it the easiest and cheapest way to upgrade your truck’s sound. Gibson’s aluminized steel construction is tough enough for most climates, and installation can be done in your driveway with basic hand tools in under an hour.
Pros:
- Most affordable upgrade option
- Very easy DIY installation — no cutting required
- Noticeable sound improvement over stock
- Good fitment for 2020-2024 Tacoma
Cons:
- Aluminized steel — not as corrosion-resistant as stainless
- Minimal performance gain compared to cat-back systems
- Sound improvement is modest
Check the Gibson Performance Axle-Back on Amazon [AFFILIATE_LINK:gibson-axleback-tacoma]
[CTA_BUTTON:gibson-axleback-tacoma:Amazon]
Exhaust Buying Guide for the 2020-2024 Toyota Tacoma
Cat-Back vs. Axle-Back vs. Header-Back: What’s the Difference?
- Axle-Back: Replaces from the rear axle to the tip. Cheapest and easiest to install. Best for sound improvement only.
- Cat-Back: Replaces everything from the catalytic converter back. The most popular upgrade — balances cost, sound, and performance gains.
- Header-Back (Full System): Replaces the entire exhaust from the exhaust manifold back. Maximum performance but most expensive and complex to install.
2.7L Four-Cylinder vs. 3.5L V6 — Does It Matter?
Yes, absolutely. Most premium cat-back exhaust systems are designed specifically for the 3.5L V6 Tacoma, which has a different pipe diameter, routing, and sound profile than the base 2.7L four-cylinder. If you’re running the four-cylinder, double-check fitment before purchasing — not all systems will be compatible, and the sound improvement on the four-cylinder is typically less dramatic.
Material Matters: Stainless vs. Aluminized Steel
- T-304 Stainless Steel: The premium choice. Highly resistant to rust and corrosion. Ideal if you live in a region with road salt, humidity, or extreme weather. Worth the extra investment for long-term durability.
- 409 Stainless Steel: A step below T-304 but still a solid choice. Good corrosion resistance at a lower price point.
- Aluminized Steel: Budget-friendly but most susceptible to rust over time. Fine for dry climates; avoid if you’re in the rust belt.
Sound Level: Finding Your Sweet Spot
Exhaust sound is deeply personal. Before you buy, listen to YouTube sound clips of your exact truck with your exact exhaust system. Pay attention to:
- Idle tone — what it sounds like sitting still
- Cruise tone — what it sounds like at 70 mph on the highway
- WOT (Wide Open Throttle) tone — full acceleration sound
- Interior drone — resonance inside the cab at highway speeds
Brief Installation Overview
Most cat-back and axle-back exhaust systems for the 2020-2024 Tacoma are designed as direct bolt-on replacements — no welding or cutting required. Here’s a general overview of what to expect:
- Lift and secure your truck — use proper jack stands or a lift. Never work under a vehicle supported only by a floor jack.
- Let the exhaust cool completely if the truck has been driven recently.
- Soak the factory hardware with penetrating oil (PB Blaster works great) and let it sit for 30+ minutes before attempting removal.
- Remove the OEM exhaust section by section, starting from the rear. Disconnect rubber hangers and unbolt flanges.
- Install the new system in reverse order — loosely hand-tighten all clamps and hangers before final torqueing to allow for alignment.
- Check for leaks on first start-up and re-tighten as needed after a heat cycle.
Estimated DIY Time: 1–3 hours depending on experience and whether factory bolts are seized.
FAQ: Exhaust for 2020-2024 Toyota Tacoma
Will a cat-back exhaust void my 2020-2024 Tacoma’s warranty?
Under the Magnuson-Moss Warranty Act, a dealer cannot void your entire warranty simply because you installed an aftermarket exhaust. However, if a dealer can prove that your exhaust modification directly caused a specific failure, they may deny coverage for that related component. Most bolt-on cat-back exhausts pose no risk to the engine, transmission, or powertrain warranty.
How much horsepower will an exhaust add to my Tacoma?
Realistically, a cat-back exhaust system on a naturally aspirated 3.5L Tacoma V6 will add approximately 5–15 horsepower depending on the system. The gains are most noticeable in throttle response and mid-range torque rather than peak horsepower numbers. Performance-focused systems like Banks Power tend to deliver more measurable gains.
Does the 2020-2024 Tacoma have a single or dual exhaust?
The stock 2020-2024 Toyota Tacoma comes with a single-exit exhaust. Many aftermarket cat-back systems maintain a single-exit configuration but upgrade the pipe diameter, muffler, and tip. Some dual-exit systems are available but are less common for this platform.
Is the install different for a 2020 vs. 2024 Tacoma?
For 2020–2023 third-generation Tacomas, the exhaust routing and fitment are nearly identical. The 2024 Tacoma represents a new (fourth) generation with a different platform and engine options, so make absolutely sure any exhaust you purchase is specifically listed for your model year. Do not assume 2020-2023 fitment applies to the 2024 model.
Which exhaust is best for a Tacoma used for off-roading?
For off-road use, prioritize ground clearance and durability. Look for systems with a high-clearance tip exit and T-304 stainless construction that can handle trail debris and water crossings. The Borla S-Type and Banks Power Monster are both excellent off-road-friendly options with robust construction and reliable fitment.
Final Verdict: Which Tacoma Exhaust Should You Buy?
After breaking down the top options, here’s our bottom line for the best exhaust for Toyota Tacoma (2020-2024):
- Best Overall: Borla S-Type Cat-Back — premium build quality, perfect balance of sound and refinement, and a warranty that backs it up for life.
- Best Sound: Flowmaster Outlaw — if you want maximum attitude, nothing on this list comes close.
- Best Value: MagnaFlow Street Series — T-304 stainless, great sound, and a price that won’t break the bank.
- Best for Towing: Banks Power Monster — engineered for real-world performance where torque matters most.
- Best Budget Pick: Gibson Performance Axle-Back — the easiest entry point to a better-sounding Tacoma.
No matter which system you choose, upgrading your Tacoma’s exhaust is one of the most satisfying modifications you can make — you’ll notice the difference every time you turn the key. Pick the one that matches your driving style, install it on a Saturday morning, and enjoy the results for years to come.
Ready to upgrade? Browse all compatible Tacoma exhaust systems below and find your perfect match.
[CTA_BUTTON:borla-stype-tacoma-catback:Amazon]