Best Steering Parts for Chevy Equinox (2019-2024): Complete Buyer’s Guide
DTP Parts is reader-supported. When you buy through links on our site, we may earn an affiliate commission at no extra cost to you.
Affiliate Disclosure: dtpparts.com is a participant in affiliate advertising programs. We may earn a commission when you purchase through links on this page, at no additional cost to you.
Finding the Right Steering Parts for Chevy Equinox (2019-2024)
If you’re dealing with loose handling, a vibrating steering wheel, or that dreaded clunking noise over bumps, your steering parts for Chevy Equinox are likely telling you something important. The 2019-2024 Chevy Equinox is one of GM’s most popular compact SUVs, and while it’s generally a reliable vehicle, its steering components — like any other car — do wear out over time. Whether you’re replacing a worn rack and pinion, inner or outer tie rods, or addressing an electric power steering issue, getting the right part the first time saves you money and headaches. This guide breaks down everything you need to know to shop smart.
Quick Comparison Table: Top Steering Parts for 2019-2024 Chevy Equinox
| Component | Brand | Best For | Price Range | Rating |
|---|---|---|---|---|
| Rack & Pinion Assembly | ACDelco | OEM-quality replacement | $300–$500 | ⭐⭐⭐⭐⭐ |
| Rack & Pinion Assembly | Moog | Budget-friendly durability | $200–$350 | ⭐⭐⭐⭐ |
| Outer Tie Rod End | Moog EV801437 | Long-lasting OE replacement | $25–$45 | ⭐⭐⭐⭐⭐ |
| Inner Tie Rod End | ACDelco 45A2356 | Direct OEM fitment | $30–$55 | ⭐⭐⭐⭐⭐ |
| Steering Gear | Cardone Reman | Remanufactured value pick | $180–$300 | ⭐⭐⭐⭐ |
| Tie Rod Assembly Kit | Detroit Axle | Complete DIY kit | $60–$100 | ⭐⭐⭐⭐ |
Top Steering Part Picks for the 2019-2024 Chevy Equinox
1. ACDelco Rack and Pinion Assembly — Best OEM-Quality Pick
When it comes to maintaining the factory feel of your Equinox, nothing beats an ACDelco rack and pinion assembly. ACDelco is GM’s own parts brand, which means this unit is engineered to match the exact tolerances and specifications of your 2019-2024 Equinox’s electric power steering system. If your current rack is leaking, binding, or causing unpredictable steering response, this is the most reliable fix available.
Check the ACDelco Rack and Pinion for Your Equinox
[CTA_BUTTON:acdelco-equinox-rack-pinion:ACDelco Rack & Pinion]
Pros:
- Direct OEM fitment — no modifications needed
- Backed by GM’s quality standards
- Includes all necessary mounting hardware
- Compatible with the Equinox’s electronic steering calibration
Cons:
- Higher price point than aftermarket alternatives
- May require a steering angle sensor reset after installation
2. Moog Rack and Pinion Assembly — Best Value for Durability
Moog has long been the go-to name for professional mechanics looking for a reliable aftermarket steering solution. Their rack and pinion assembly for the 2019-2024 Equinox features gusher bearing technology and enhanced seals that are actually designed to outlast OEM components in real-world conditions. If you’re not brand-loyal to ACDelco and want to stretch your dollar, Moog is a smart choice.
Shop Moog Rack and Pinion for Chevy Equinox
[CTA_BUTTON:moog-equinox-rack-pinion:Moog Rack & Pinion]
Pros:
- Improved sealing over stock for longer service life
- Competitively priced compared to OEM
- Widely available and easy to source
- Trusted by professional technicians nationwide
Cons:
- May require electronic steering recalibration
- Warranty varies by retailer
3. Moog EV801437 Outer Tie Rod End — Best Tie Rod Replacement
Tie rod ends are often the first steering component to wear out on high-mileage Equinox models. The Moog EV801437 outer tie rod end is a direct replacement for 2019-2024 Equinox models and features a problem-solver design with a greaseable fitting that keeps the joint lubricated far longer than sealed OEM units. You’ll feel the difference immediately in steering precision.
Buy Moog EV801437 Outer Tie Rod End
[CTA_BUTTON:moog-ev801437-tie-rod:Moog Tie Rod End]
Pros:
- Greaseable design for extended component life
- Direct bolt-on fitment for 2019-2024 Equinox
- Affordable price — replace both sides without breaking the bank
- Reduces steering play and improves alignment stability
Cons:
- Requires a wheel alignment after installation
- Grease fitting requires periodic maintenance
4. ACDelco 45A2356 Inner Tie Rod — Best for Complete Steering Restoration
If your outer tie rods are worn, there’s a good chance your inner tie rods aren’t far behind. The ACDelco 45A2356 inner tie rod is engineered specifically for the Equinox platform and delivers the tight, responsive steering feel you expect from a GM factory component. Replacing both inner and outer tie rods together is a common shop recommendation for high-mileage vehicles.
Order ACDelco Inner Tie Rod for Equinox
[CTA_BUTTON:acdelco-45a2356-inner-tie-rod:ACDelco Inner Tie Rod]
Pros:
- Genuine GM part — guaranteed fitment
- Eliminates inner steering play and vibration
- Pairs perfectly with the ACDelco outer tie rod
Cons:
- Requires an inner tie rod removal tool for DIY install
- Priced slightly higher than generic aftermarket options
5. Detroit Axle Complete Tie Rod Assembly Kit — Best DIY Value Kit
For DIY mechanics who want to tackle a full steering refresh in one shot, the Detroit Axle complete tie rod kit for the 2019-2024 Equinox is an excellent budget option. These kits typically include both inner and outer tie rod ends for both sides of the vehicle — everything you need in one box at a fraction of the cost of buying individual components.
Get the Detroit Axle Tie Rod Kit for Equinox
[CTA_BUTTON:detroit-axle-tie-rod-kit-equinox:Detroit Axle Kit]
Pros:
- Complete kit — replaces all four tie rod ends
- Significant savings versus buying parts individually
- Good fitment for 2019-2024 Equinox 1.5T and 2.0T engines
Cons:
- Not an OEM-level brand — quality may vary
- Some users report longer break-in period
Buying Guide: What to Look for in Chevy Equinox Steering Parts
Understand the Equinox’s Electric Power Steering System
The 2019-2024 Chevy Equinox uses an Electric Power Steering (EPS) system — meaning there’s no power steering fluid. This is an important detail when shopping for parts. You’ll never need to bleed a power steering system, but it does mean that some steering issues (like random stiffness or loss of assist) may be electrical in nature and require a steering angle sensor reset or module recalibration rather than a physical part replacement. Always confirm with a diagnostic scan before ordering parts.
OEM vs. Aftermarket: Which Is Better?
For the Equinox’s EPS system, OEM or OEM-equivalent parts (like ACDelco) are generally recommended for the rack and pinion assembly. Aftermarket brands like Moog and Detroit Axle are excellent for tie rod ends and other mechanical linkage components where tolerances are slightly more forgiving. Avoid the cheapest no-name options on auction sites — they often cause premature wear and alignment issues.
Watch for These Symptoms Before Buying
- Loose or wandering steering: Likely worn tie rod ends or a worn rack
- Clunking over bumps: Often inner tie rods or steering shaft U-joints
- Vibration through the steering wheel: Could be tie rods, wheel bearings, or rack issues
- Power steering warning light: Usually an EPS module or sensor — not a mechanical part
- Uneven tire wear: Often caused by misaligned tie rod ends
Confirm Your Exact Fitment
The 2019-2024 Equinox came in multiple trims (L, LS, LT, Premier) and with two engine options — the 1.5L turbocharged 4-cylinder and the 2.0L turbocharged 4-cylinder. Most steering components fit all trim levels, but always double-check your VIN and engine code before ordering. FWD and AWD configurations generally share the same front steering components.
Brief Installation Overview
Difficulty Level: Moderate (DIY-friendly for tie rods; professional recommended for full rack replacement)
Replacing tie rod ends on the 2019-2024 Equinox is a manageable DIY job with basic hand tools, a torque wrench, and a tie rod removal tool. The general process involves:
- Safely lift and support the vehicle on jack stands
- Remove the front wheel
- Loosen and remove the outer tie rod end from the steering knuckle
- Count the turns as you unthread the outer tie rod from the inner
- Install the new tie rod end with the same number of turns for a rough alignment
- Torque to spec (typically 33–37 ft-lbs for outer tie rod castle nut)
- Always follow up with a professional wheel alignment
Rack and pinion replacement is a more involved job involving disconnecting the steering shaft, subframe bolts, and EPS electrical connections. Most owners are better served having this done by a trusted shop to ensure proper EPS calibration after installation.
FAQ: Steering Parts for 2019-2024 Chevy Equinox
How long do tie rod ends last on a Chevy Equinox?
Most tie rod ends on the 2019-2024 Chevy Equinox last between 70,000 and 100,000 miles under normal driving conditions. However, frequent driving on rough roads, potholes, or exposure to road salt can shorten their lifespan significantly. Inspect them annually during routine suspension checks.
Does the 2019-2024 Equinox use hydraulic or electric power steering?
The 2019-2024 Chevy Equinox uses an Electric Power Steering (EPS) system. There is no power steering fluid or hydraulic pump. The steering assist is provided electronically, which means you will never need to check or refill power steering fluid on these models.
Do I need a wheel alignment after replacing tie rod ends on my Equinox?
Yes, absolutely. Any time tie rod ends are replaced on the Chevy Equinox, a professional wheel alignment is required. Even small changes in tie rod length affect the vehicle’s toe setting, which directly impacts tire wear and straight-line tracking. Skipping alignment will cause your new tires to wear unevenly.
What causes the steering to feel loose on my 2019-2024 Equinox?
Loose or vague steering on the 2019-2024 Equinox is most commonly caused by worn outer tie rod ends, a worn rack and pinion assembly, or worn steering shaft U-joints. An EPS calibration issue can also cause unusual steering feel. Have the vehicle inspected to pinpoint the exact cause before ordering parts.
Is replacing the rack and pinion on a Chevy Equinox a DIY job?
Replacing the rack and pinion on a 2019-2024 Chevy Equinox is considered an intermediate-to-advanced job. It requires disconnecting the EPS steering column connection, removing subframe components, and performing an electronic steering angle sensor reset afterward. Most home mechanics without alignment equipment should have this done professionally.
Final Verdict: Best Steering Parts for Your 2019-2024 Chevy Equinox
Keeping your Equinox’s steering system in top shape is essential for safe, confident driving. Here’s the bottom line:
- Best overall rack and pinion: ACDelco — unmatched OEM fitment and quality for GM’s EPS system
- Best value rack and pinion: Moog — excellent durability at a lower price point
- Best tie rod ends: Moog EV801437 — greaseable design beats OEM longevity
- Best complete DIY kit: Detroit Axle — affordable full-system refresh in one box
No matter which component you’re replacing, always confirm fitment for your specific year, engine, and drivetrain configuration. And remember — any steering work should be followed up with a proper wheel alignment to protect your tires and ensure safe handling. Your Equinox deserves parts that keep you in control.
Browse All Steering Parts for 2019-2024 Chevy Equinox
[CTA_BUTTON:equinox-steering-parts-collection:Shop All Equinox Steering Parts]