Best Steering Parts for Honda Accord (2019-2024): Complete Buyer’s Guide
DTP Parts is reader-supported. When you buy through links on our site, we may earn an affiliate commission at no extra cost to you.
Affiliate Disclosure: dtpparts.com is a participant in affiliate advertising programs. We may earn a commission when you purchase through links on this page, at no additional cost to you.
Best Steering Parts for Honda Accord (2019-2024): Everything You Need to Know
If you drive a 2019-2024 Honda Accord, you already know how satisfying that factory steering feel can be — responsive, precise, and confidence-inspiring through every corner. But when your steering parts for Honda Accord start to wear out, that crisp feel turns into vague wandering, clunking over bumps, or worse, unsafe play in the wheel. Whether you’re dealing with a worn tie rod, a leaking rack and pinion, a failing power steering pump, or a damaged steering shaft, replacing the right component makes all the difference. In this guide, we break down the top steering components for the 10th and 11th generation Accord, what to look for when buying, and how to get your car steering like new again.
Quick Comparison: Top Steering Parts for Honda Accord (2019-2024)
| Component | Top Brand | Best For | Difficulty | Avg. Cost Range |
|---|---|---|---|---|
| Outer Tie Rod End | Moog, ACDelco | Loose steering, uneven tire wear | Easy–Moderate | $20–$60 each |
| Inner Tie Rod End | Moog, TRW | Steering wander, shimmy | Moderate | $25–$70 each |
| Rack and Pinion Assembly | Detroit Axle, ACDelco | Major steering failure, fluid leaks | Advanced | $150–$400 |
| Steering Shaft / Coupler | Dorman, OEM Honda | Clunking, clicking on turns | Moderate | $40–$120 |
| Power Steering Pump | Cardone, Atsco | Heavy steering, whining noise | Moderate | $80–$200 |
| Steering Wheel | OEM Honda, Grant | Upgrade, airbag replacement | Moderate–Advanced | $100–$500+ |
Top Steering Part Picks for the 2019-2024 Honda Accord
1. Outer Tie Rod Ends — Most Common Replacement
The outer tie rod end is the most frequently replaced steering component on the Accord. These ball-socket joints connect the steering rack to the steering knuckle, and they take a beating from road impacts every single day. On 2019-2024 Accords, owners commonly report play in the steering and uneven front tire wear as the first warning signs.
Top Pick: Moog EV800806 Outer Tie Rod End — Moog is the gold standard in steering and suspension parts. Their Problem Solver design includes enhanced grease retention and a gusher bearing for smoother articulation under load. These are a direct OEM replacement for all trim levels including Sport, EX, EX-L, and Touring.
Check Price on Moog Outer Tie Rod End for Honda Accord
[CTA_BUTTON:moog-ev800806-outer-tie-rod:Check Latest Price]
Pros:
- Industry-leading durability and fitment
- Greaseable design extends service life
- Direct bolt-on replacement — no modifications needed
- Available for both driver and passenger sides
Cons:
- Slightly higher price than budget alternatives
- Requires wheel alignment after installation
2. Complete Rack and Pinion Assembly — Full Steering Rebuild
If you notice fluid pooling under your Accord near the front axle, stiff or uneven steering resistance, or a burning smell after driving, your rack and pinion assembly may be failing. The 2019-2024 Accord uses an Electric Power Steering (EPS) system, meaning the rack integrates directly with the electric assist motor — so sourcing a quality remanufactured or new unit is critical.
Top Pick: Detroit Axle Complete Rack and Pinion Assembly — Detroit Axle has earned a solid reputation for high-volume OEM-spec parts at competitive prices. Their Accord rack assemblies are pressure-tested and include all mounting hardware and inner tie rods as a complete kit, saving you time and sourcing hassle.
Check Price on Detroit Axle Rack and Pinion for Honda Accord
[CTA_BUTTON:detroit-axle-accord-rack-pinion:Shop Detroit Axle]
Pros:
- Complete assembly — inner tie rods included
- Pressure-tested before shipping
- Competitively priced vs. OEM dealership parts
- Fits 2018–2022 Accord 1.5T and 2.0T engines
Cons:
- Professional installation strongly recommended
- Requires alignment after install
- Not compatible with all trim configurations — verify fitment
3. Steering Shaft / Intermediate Shaft — Fix That Annoying Clunk
One of the most common complaints from 2019-2021 Accord owners is a clunking or clicking sound when turning, especially at low speeds in parking lots. The culprit is almost always a worn intermediate steering shaft or coupler. This is a known wear point on the 10th-gen platform.
Top Pick: Dorman 425-389 Steering Shaft — Dorman’s OE FIX steering shafts for the Accord are engineered to exceed OEM specs, often with improved materials at the coupling point to prevent premature failure. Many owners report this single replacement completely eliminates the clunk.
Check Price on Dorman Steering Shaft for Honda Accord
[CTA_BUTTON:dorman-425-389-steering-shaft:View Dorman Steering Shaft]
Pros:
- Specifically engineered for the Accord’s known failure point
- Often eliminates clunking without full rack replacement
- Moderate DIY difficulty — no specialty tools required
- Much cheaper than a full rack replacement
Cons:
- Tight working space in the engine bay
- Some model years may require steering wheel removal
4. Inner Tie Rod Ends — Don’t Overlook These
Inner tie rod ends wear out less frequently than outers, but when they do, you’ll feel it immediately — excessive steering play, vibration through the wheel, and a loose, disconnected feeling. On the 2019-2024 Accord, inner tie rods thread into the steering rack, so having the right tool (an inner tie rod removal tool) is essential.
Top Pick: Moog EV800810 Inner Tie Rod End — Again, Moog leads the category. Their inner tie rods feature a larger contact patch and forged construction for superior load capacity compared to OEM spec.
Check Price on Moog Inner Tie Rod End for Honda Accord
[CTA_BUTTON:moog-ev800810-inner-tie-rod:Shop Moog Inner Tie Rods]
Pros:
- Forged construction for maximum durability
- Precise OEM fitment
- Excellent warranty coverage
Cons:
- Requires inner tie rod removal tool
- Always replace in pairs for even wear
Honda Accord Steering Buying Guide: What to Consider
OEM vs. Aftermarket Steering Parts
For a daily driver like the Accord, quality aftermarket parts from brands like Moog, Dorman, and Detroit Axle offer an excellent balance of value and durability. Genuine Honda OEM parts provide exact-spec fitment and are ideal if your car is under warranty or if you’re doing a dealership-level service. For most DIYers, trusted aftermarket is the smart choice.
EPS System Awareness (2019-2024 Specifics)
The 2019-2024 Accord uses an Electric Power Steering (EPS) system — there is no hydraulic fluid, no pump to worry about in most cases. This simplifies the system but means your rack assembly contains integrated electronics. Always confirm parts are compatible with your specific trim, engine variant (1.5T or 2.0T), and whether your Accord has the Sport Handling Package, which can affect steering calibration.
Fitment Check: 2019-2024 Accord Trim Variants
- LX, Sport, EX, EX-L: 1.5T turbocharged engine — standard EPS rack
- Sport 2.0T, Touring 2.0T: 2.0T turbocharged engine — same EPS architecture, verify rack part numbers
- Hybrid models: May have different steering calibration — always confirm before ordering
Signs You Need New Steering Parts
- Steering wheel pulls to one side consistently
- Clunking, knocking, or clicking sounds when turning
- Excessive play or looseness in the steering wheel
- Uneven or rapid tire wear on front tires
- Vibration felt through the steering wheel at highway speed
- Squealing or whining when turning (less common with EPS)
Brief Install Overview
Tie Rod Ends (Outer): Raise the vehicle, support safely on jack stands, remove the wheel. Disconnect the tie rod from the knuckle using a pickle fork or ball joint separator. Count the thread turns as you remove the old tie rod so you can replicate toe setting. Install new tie rod, torque to spec, get an alignment. Difficulty: 2/5
Intermediate Steering Shaft: Disconnect the battery, remove the lower dash panel, locate the shaft between the rack and steering column. Remove two pinch bolts, slide shaft free, install new unit. Difficulty: 3/5
Rack and Pinion Assembly: This is a full front-end job — remove front wheels, disconnect tie rods, lower crossmember bolts, disconnect EPS wiring harness, and drop the rack. Best left to a professional or experienced DIYer. Difficulty: 5/5
Pro Tip: Always get a four-wheel alignment after any steering component replacement. Skipping alignment after tie rod work will ruin your new tires within months.
Shop Complete Steering Install Kits for Honda Accord
[CTA_BUTTON:accord-steering-install-kit:Browse Install Kits]
Frequently Asked Questions (FAQ)
How long do tie rod ends last on a 2019-2024 Honda Accord?
Most tie rod ends on the Accord last 70,000–100,000 miles under normal driving conditions. Driving on rough roads, hitting potholes frequently, or neglecting wheel alignments can shorten their lifespan significantly. Inspect them during every brake or tire service.
Does the 2019-2024 Honda Accord have hydraulic or electric power steering?
The 2019-2024 Honda Accord uses Electric Power Steering (EPS). There is no hydraulic fluid or pump involved. The assist is provided by an electric motor integrated into the steering rack, which makes maintenance simpler but means rack replacement is more complex due to integrated electronics.
What causes the clunking noise when turning in a Honda Accord?
The most common cause of a clunking sound when turning in the 2019-2021 Accord is a worn intermediate steering shaft or coupler. This is a known issue on this generation. Other causes include worn tie rod ends, loose sway bar links, or worn strut mounts.
Can I replace Honda Accord tie rods myself?
Yes — outer tie rod end replacement is a beginner-to-intermediate DIY job that requires basic hand tools, a ball joint separator, and a torque wrench. Inner tie rods require a specialized inner tie rod removal tool but are still doable at home. Always follow up with a professional wheel alignment.
How much does it cost to replace the rack and pinion on a Honda Accord?
At a dealership, expect to pay $800–$1,500 for parts and labor. An independent shop will typically charge $500–$900. Doing it yourself with a quality aftermarket assembly like Detroit Axle can bring total costs down to $200–$400, but this is a complex job requiring significant mechanical experience.
Are Moog steering parts good for Honda Accord?
Absolutely. Moog is widely considered the top aftermarket brand for tie rod ends and steering components. Their parts meet or exceed OEM specifications and frequently outperform factory components in durability. They’re the go-to recommendation from professional mechanics for Honda applications.
Final Verdict: Best Steering Parts for Your 2019-2024 Honda Accord
The 2019-2024 Honda Accord is an excellent platform that deserves quality steering components to match its handling capabilities. For most owners, starting with the tie rod ends — particularly Moog outer and inner tie rods — covers the most common failure points and delivers a noticeable improvement in steering precision. If you’re experiencing the notorious clunk on your 2019-2021 Accord, the Dorman intermediate steering shaft is a targeted, cost-effective fix that many owners swear by.
For more serious steering issues, a complete Detroit Axle rack and pinion assembly delivers dealer-level performance at a fraction of the cost. Whatever component you’re replacing, always verify fitment by engine type, trim, and model year, and never skip the wheel alignment afterward.
Your Accord was engineered to deliver one of the best driving experiences in its class — the right steering parts will keep it that way for another 100,000 miles.
Browse All Steering Parts for 2019-2024 Honda Accord
[CTA_BUTTON:honda-accord-steering-parts-all:Shop All Accord Steering Parts]